XRAY XB9’13 Clutchbell Endplay Tech Tip

http://www.rceasy.com/wp-content/blogs.dir/1/files/2013/05/xb9tt01.jpg

When you assemble the XRAY flywheel on the engine shaft the endplay should be between 9.9 – 10.0mm and in that case you use the #962050 Washer S 5x10x1.0 (10).

In some cases the endplay might be less then 9.9mm and then you do not use the #962050 washer.

Source : XRAY

See the Video ----> XRAY XB9’13 Clutchbell Endplay Tech Tip